鐵之狂傲

標題: 『 陸軍武器 』－ AAVP7A1 「陸上蛟龍」兩棲突擊人員運輸車 [列印本頁]
作者: 克里斯Chris    時間: 07-5-27 12:40
標題: 『 陸軍武器 』－ AAVP7A1 「陸上蛟龍」兩棲突擊人員運輸車
LVTP7 Landing Vehicle, Tracked
AAVP7A1 Assault Amphibian Vehicle Personnel




The LVTP7, which entered the Marine Corps inventory in the early 1970s, was a quantum improvement over the short-ranged LVTP5 of the Vietnam era. Weighing in at 26 tons (23,991 kg) combat-loaded, and with a three-man crew, it can carry 25 Marines. With a road speed of 45 mph (72 km/h), it is also fully amphibious with water speeds up to 8 mph (13 km/h). It is not as heavily armed or armored as the Army's Bradley infantry fighting vehicle; on the other hand, the M2A1 Bradley carries only seven troop passengers. In 1985 the Marine Corps changed the designation of the LVTP7Al to AAV7Al -- amphibious assault vehicle -- representing a shift in emphasis away from the long-time LVT designation, meaning "landing vehicle, tracked." Without a change of a bolt or plate, the AAV7Al was to be more of an armored personnel carrier and less of a landing vehicle.
The AAVP7A1 is an armored assault amphibious full-tracked landing vehicle. The vehicle carries troops in water operations from ship to shore, through rough water and surf zone. It also carries troops to inland objectives after ashore. The amphibious capability of the AAV makes it unique among all DOD systems. This forcible entry amphibious capability is the unique capability that sets the Marine Corps apart from the other services. A portion [64%] of the AAV fleet will undergo a reliability, availability, and maintainability (RAM) upgrade, and a rebuild to standard (RS) retrofit, to ensure Marine AAVs remain maintainable until the arrival of the Advanced Amphibious Assault Vehicle (AAAV).


The primary responsibility of the AAVs during an amphibious operation is to spearhead a beach assault. They disembark from ship and come ashore, carrying infantry and supplies to the area to provide a forced entry into the amphibious assault area for the surface assault element. Once the AAVs have landed, they can take on several different tasks: manning check points, Military Operations in Urban Terrain (MOUT) missions, escorting food convoys or mechanized patrol. The standard AAV comes equipped with a MK-19 grenade launcher and a M2 .50 caliber machine gun. With a 10,000 pound capacity, the AAV can also be used as a bulk refueler or a field expedient ambulance. It is easily the most versatile vehicle in the Marine Corps.

The AAV was originally designed and built in the late 1960s and early 1970s. Replacement vehicle designs in the early 1980s were canceled and a Service Life Extension Program (SLEP) was initiated. This SLEP was completed in 1986. The SLEP extended the projected life of the AAV until the mid 1990s when a new amphibious assault vehicle was expected to be fielded. A Product improvement Program (PIP) in the late 1980s and early 1990s resulted in a significant increase in the weight of the AAV. This weight growth was not matched with an increase in power or suspension components. The increased weight has strained the ability of the suspension to provide a smooth and safe ride for embarked personnel while decreasing overall ground clearance from 16 inches to less than 12 inches. The result has been an increased maintenance requirement on the power plant, suspension, and electrical systems. Additionally, a larger than expected corrosion control maintenance program has been required.

The new Advanced Assault Amphibious Vehicle (AAAV) is in the program definition and risk reduction phase of the acquisition process. The earliest production schedule for the AAAV projects an Initial Operating Capability (IOC) in 2006 and Full Operating Capability (FOC) by 2012. The AAAV fielding schedule requires the expected life of the SLEP AAV to be more than double what was planned. The projected fielding schedule of the AAAV means the AAV will be in service for another 15 years.
作者: 克里斯Chris    時間: 07-5-27 12:41
Many systems on the AAV are reaching the end of their useful life and will require replacement. , Marine Corps System Command determined that instead of Inspect or Repair Only as Necessary (IROAN), the next cycle of AAV depot maintenance action would more appropriately be a Rebuild to Standard.

The Assault Amphibious Vehicle Reliability, Availability, Maintainability/Rebuild to Standard (AAV RAM/RS) Program provides for a replacement of both the engine and suspension with US Army M2--Bradley Fighting Vehicle (BFV) components modified for the AAV. The ground clearance will return to 16 inches and the horsepower to ton ratio will change from 13 to 1 back to 17 to 1. AAV RAM/RS plans for the rebuild of all AAV systems and components in order to return the AAV back to the original vehicle's performance specifications and ensure acceptable Fleet Marine Force (FMF) AAV readiness ratings until the AAAV is at FOC. Introduction of the BFV components and the rebuild to standard effort is expected to reduce maintenance costs for the remaining life of the AAV through the year 2013. The projected savings are in the range of $400 to $500 million dollars (FY95 dollars).

This program, with rebuild effort directed to the Marine Corps Maintenance Centers at Albany, GA and Barstow, CA, was approved in June 1997 as a new start acquisition program beginning in October 1998, with a maximum four year production duration.

The AAV RAM/RS program was approved as an FY99 new start acquisition in June 1997, and successfully achieved Milestone II in December 1997, Milestone III in October 1998, and commenced production in November 1998. Consolidation of diverse functions and responsibilities within the government team, establishment of a long term contractual relationship with industry to provide technical, engineering and management support for the remaining service life of the AAV, and extensive use of multiple command Integrated Product Teams (IPTs) with industry participation led to early development of quality products and an accelerated schedule.


The AAV RAM/RS Team implemented a number of innovative acquisition approaches and processes to centralize management of an upgrade program to be performed through U.S. Marine Corps depots and industry facilities, to increase the quality, efficiency, responsiveness and timeliness of the acquisition process, and to reduce Total Ownership Cost (TOC) by over $550 million.
The AAV program organizational responsibilities and authorities had been dispersed over the previous four years and emphasis on this soon-to-be-replaced system was more on maintenance than upgrade and acquisition. The AAV RAM/RS Team composed of responsible elements of the Marine Corps Systems Command (SysCom) in Quantico, VA, and Camp Pendleton, CA, and the Marine Corps Logistics Bases (LogBases), Albany, GA, rectified this dispersion by providing a unified management approach for this complicated and aggressive program.
作者: 克里斯Chris    時間: 07-5-27 12:41
The AAV program has been in existence since the late 1960s and has seen a number of different contractors supporting the various upgrades to the vehicle. The AAV will, however, be fully replaced by the Advance Amphibious Assault Vehicle (AAAV) within a 15 year period and the AAV RAM/RS program, which maintains the AAV in a cost effective and affordable manner until this replacement, is only a four year program. Therefore, the AAV facts of life would not typically interest the type of contractors necessary to appropriately support the AAV. In order to interest industry in supporting this important combat vehicle for its remaining life, the AAV RAM/RS Team offered industry the opportunity to compete for a contract that would select an offeror who would initially perform the hull modifications and parts buy on the AAV RAM/RS program and also provide long term Technical, Engineering and Management Support (TEAMS) and Foreign Military Sales (FMS) support. This innovative concept resulted in the original manufacturer, United Defense (formerly FMC) returning as an integral member of the AAV government/industry team. Additionally, industry was offered and has accepted location of its manufacturing facilities within the LogBases with potential use of its work force on agreed upon FMS efforts. This arrangement allows stabilization of the government's expert work force through industry business innovations to the government production line, and the availability of a dedicated industrial partner for the service life of the AAV.


The AAV7A1 is the newest Assault Amphibian in a series that started with the Roebling ALLIGATOR. The Alligator was developed over a period of 7 years, starting in 1932. The first "Gators" were a disappointment, in that the water speed was only 2.5 mph. The land speed was 25 mph. Through design changes, and by using larger engines, the water speed of the Alligator was increased to 8.6 mph by 1939. In 1940, Roebling built a new model which was designated the CROCODILE. The Crocodile had a land speed of 25 mph and a water speed of 9.4 mph.
The LVT-1 was a direct copy of the Crocodile, except that it was fabricated from sheet steel instead of aluminum. The LVT-1 was in production from 1941 to 1943. Being heavier, the land speed of the LVT-1 was 18 mph and the water speed was 7 mph. A 6-cylinder, 146 hp Hercules engine was used for power. The LVT-1 was propelled by two endless chains fitted with cleats, both in the water and on land. The first LVT-1's were used as logistic support vehicles only. They were not armored and carried no armament, however, this soon changed. At the Battle of Tarawa, bolted on armor plate was used and the vehicles were equipped with one to four 30 cal. machine guns.


The second generation of LVT's was the LVT-2. This vehicle was developed in 1941 and was in production from 1942 to 1945. The LVT-2 was the basic design for a series of vehicles used during WW II. This family of vehicles included the: LVTA1, LVTA2, LVT4, LVTA4, and LVTA5. A few of the LVTA5s were modified in 1949 and continued in service until the mid 1950s. These vehicles were powered with 7-cylinder radial aircraft engines built by Continental Motors. These engines developed 220hp, their service life was very short. Major overhaul was scheduled for 100 hours, however few ever lasted that long. The transmission was a 5 speed, manual shift SPICER that incorporated a manually operated steer differential. This transmission had been developed for the M-3 light tank. As a result, the transmission was too narrow for the LVT. This problem was overcome by using four final drives. The internal finals were bolted to the transmission / differential gear case and supported by two mounting yokes. The external final drives were bolted to the hull and powered the drive sprockets. This generation of LVTs was used through the Okinawa campaign in 1945.
作者: 克里斯Chris    時間: 07-5-27 12:42
Specifications
ManufacturerFMC Corporation
Date First Prototype1979
Date First Production Vehicle1983
Crew3
WeightUnloaded: 46,314 Pounds (With EAAK, Less Crew, Fuel, OEM, and Ammo)
Combat Equipped: 50,758 Pounds (EAAK, Crew, Fuel, OEM, and Ammo)
Troop Loaded: 56,743 Pounds (Combat Equipped with Troops)
Cargo Loaded: 60,758 Pounds (Combat Equipped with Cargo)
Mine Clearance Kit: 61,158 Pounds (Combat Equipped with MKl MOD 0 MCS)
Load Capacity21 Combat Equipped Troops (@ 285 Pounds) or
10,000 Pounds of Cargo
Fuel Capacity171 Gallons
Cruising RangeLand at 25 MPH: 300 Miles
Water at 2600 RPM: 7 Hours
Cruising SpeedLand: 20 to 30 MPH
Water: 6 MPH
Maximum Speed ForwardLand: 45 MPH
Water: 8.2 MPH
Maximum Speed ReverseLand: 12 MPH
Water: 4.5 MPH
EngineMake: Cummins
Model: VT400
Type: 4 Cycle, 8 Cylinder, 90' Vee, Water Cooled, Turbocharged
Fuel: Multifuel
Cargo CompartmentLength: 13.5 Feet
Width: 6.0 Feet
Height: 5.5 Feet
Volume: 445.5 Cubic Feet
Capacity: 21 Combat Equipped Troops
Armament and AmmunitionHBM2 Caliber.50 Machine Gun and
MK 19 MOD3 40 MM Machine Gun
Unit Replacement Cost$2.2 - 2.5 Million
作者: 克里斯Chris    時間: 07-5-27 12:42
AAVP7 三視圖







作者: 克里斯Chris    時間: 07-5-27 12:43
AAVP7 圖集











作者: 克里斯Chris    時間: 07-5-27 12:44
美國AAVP7系列兩棲突擊車

　長8米，空車重17.5噸，滿載25.88噸。1983~1985年裝備部隊，美國海軍陸戰隊裝備1300多輛。3名成員，可運載21名陸戰隊員或4.54噸物資。也可以改裝燃料空氣彈投射系統用於掃雷。

　　陸上行程:480千米(40千米/小時)。水上行駛時間:7小時(2600轉/分)。抗浪能力:可穿越180厘米海浪(滿載),300厘米海浪條件下可以生存。


　　裝甲防護:(35~45.5毫米鋁合金裝甲),部分車輛改裝以色列附加裝甲。火力:電動單人炮塔,12.7毫米機槍或40毫米榴彈發射器。

　　AAVP7A1型兩棲突擊車、AAVC7A1型兩棲指揮、控制與通信車、AAVR7A1型兩棲搶修車。

　　該車曾參加海灣戰爭，實戰中暴露出一系列缺點，如：懸掛系統超負荷、通信設備過熱、缺乏夜戰能力、陸上行程短、速度慢、跟不上M1主戰坦克；水上航速低，不能用於超視距登陸等等。美國海軍陸戰隊計劃用M2步兵戰車的發動機和傳動系統改裝部分AAVP7以延長其服役期限，但是AAVP7最終將被新研製的AAAV高速兩棲突擊車代替。
作者: 克里斯Chris    時間: 07-5-27 12:45
Q:

LVTP7與AAV7兩棲突擊車的差別

A:

LVT的全名是Landing Vehicle, Tracked(登陸運輸載具)

AAV的全名是Assault Amphibian Vehicle Personnel (兩棲突擊人員載具)



為什麼會有不同的命名.原因是1985年.戰術運用方式的改變

原來LVT的功能只是純粹的將人員送上海灘.支援陸戰隊的灘頭火力.

而現在必須隨著大部隊更深入內陸執行深入打擊任務.



所以LVTP7A1開始進行動力.火力.防護力的性能提昇作業後

正式改名為AAVP7A1

之後部分AAVP7A1又進行動力更新,變成RAM/RS(Reliability, Availability, Maintainability/Rebuild to Standard )型AAVP7A1


LVTP7A1等同於M113 APC

AAVP7A1等同於M2

RAM/RS型AAVP7A1等同於M2A2

(來源:知識)



歡迎光臨 鐵之狂傲 (https://gamez.com.tw/)