The M1085 Long Wheel Base (LWB) Truck is designed to transport soldiers and cargo in International Standardized Operations Containers . The M1085 has a payload capacity of 10,000 pounds and to facilitate loading/unloading, the bed side rails are mounted on hinges. The cargo bed can be equipped with an optional bench seat kit for transport of soldiers. The bench seats are constructed of a non-wood material and attach to the cargo bed side rails. The seats can be folded down and stowed when not in use.
Soldiers are assisted climbing in and out of the cargo bed area with the aid of a ladder stowed on the vehicle when not in use. A canvas and bows kit is provided to keep soldiers and cargo protected from the elements. The M1085 can be equipped with a self-recovery winch capable of fore/aft vehicle recovery operations. The winch has 280 feet of line capacity and 15,500 pounds bare drum line pull at 110% overload.作者: 克里斯Chris 時間: 08-2-2 11:05
M1085 Long Wheel Base (LWB) Truck ：
作者: 克里斯Chris 時間: 08-2-2 11:06
No other tactical truck in its class can match its standard features:
Full-time all-wheel drive
Soldier-smart CTIS (Central Tire Inflation System)
Fully automatic transmission
Integral transfer case
Anti-sway bar
High horsepower-to-weight ratio
Fully MANPRINT compliant
Nonwooden troop seats
HAEMP hardened 作者: 克里斯Chris 時間: 08-2-2 11:07
數據資料：
Basic Vehicle Information
Vehicle Model M1085
NSN 2320-01-354-4530
Drive 6 x 6 (full-time) with locking interaxle differential
Engine Diesel, EPA compliant, 290 hp
Transmission Fully automatic
Axles Single reduction with outboard planetaries
Cab 3-Man, cab-over-engine
Tires Super singles with CTIS作者: 克里斯Chris 時間: 08-2-2 11:07
Dimensions
Length 349" (8,863 mm)
Height Operational
For Air Transport 112" (2,845 mm)
105.5" (2,680 mm)
Width 96" (2,438 mm)
Wheelbase 177" (4,500 mm)
Vehicle Curb Weight No Kits, Crew, Fuel 20,836 lb (9,451 kg)
Ground Clearance Loaded 22" (559 mm)作者: 克里斯Chris 時間: 08-2-2 11:07
Performance Characteristics
Maximum Speed Governed, at Gross Weight 58 mph (94 km/h)
Range Minimum, at Gross Weight 300+ mi (483+ km)
Maximum Grade 60%
Approach Angle 40o
Departure Angle Standard 19o
Side Slope 30%
Fording Without KIT
With KIT 36" (914 mm)
60" (1,524 mm)
Payload 10,000 lb (4,536 kg)
Towed Load 21,000 lb (9,526 kg)作者: 克里斯Chris 時間: 08-2-2 11:08
Equipment Specifications
Cab Crew Seating 3-Man
Seat Design Fore/Aft adjustable
Steering Wheel Adjustable, tilt and telescopic
Steering Type Power assist
Storage (behind seats) 4 cu-ft each
Cab Suspension Air spring with integral dampers
Engine Caterpillar, Diesel, 6-Cylinder 6.6 L, turbocharged and aftercooled
Rating 290 hp (216 kW) @ 2600 rpm, EPA-certified
Speeds 7 speeds, automatic/select
Full-time All-wheel Drive Integral transfer case with locking interaxle differential
Normal Operation 30% torque front wheels, 70% torque rear wheels
Off-Road (locked diff.) Equal speed front-to-rear
Oil 31.8 qt (30 L) (MIL-L-2104D, MIL-L-46167)
Axles Rockwell Front, Ft-rear, and R-rear
Carrier Single reduction, amboid gearing
Wheel Ends Bevel gear wheel end reduction
Wheel End Ratio 2:1
Overall Axle Gear Ratio 7.8:1
Front Axel Steering Angle 35o
Brakes Air-activated, internal expansion (wedge)
Alternator Engine-driven EMI/RFI suppressed, waterproof
Rating Standard 100 amp
Option 200 amp
Voltage 12/24 V
Tire Inflation System Eaton Electronic (cab-mounted) controls
- Highway - Cross-country - Sand/Mud/Snow
- Emergency
Cargo Bed Dimensions 240 x 95" (6,096 x 2,413 mm)
Ladder Stowed, metallic
Construction All steel, E-coat rustproofing, dropside with side rail storage
Standard Options Troop seats, stowable nonwooden; bows and tarp kit
Material Handling
Equipment (Optional) Loading/Unloading Crane Loads/unloads cargo bed, electric operation, 1,500 lb (680 kg) lift at 4 ft (1.2 m)
Self-Recovery Winch Standard Option Fore/aft recovery positions; hydraulic operation;
280 ft (85.3 m) line capacity; 15,500 lb (7,031 kg) bare drum line pull; 110% overload作者: 克里斯Chris 時間: 08-2-2 11:12
載具介紹：
