鐵之狂傲

標題: 用GIMP把原圖做成模版的過程 [列印本頁]

---

作者: 無我皇    時間: 15-9-8 21:33
標題: 用GIMP把原圖做成模版的過程


Original Picture

原圖

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
This map of the environment is in SuSE Linux 7P
To extremely lightweight window manager ctwm environment to edit,
Picture display GIMP to open the original image,
On the original choice - depending on the color (By color ...)

這張圖的環境是在 SuSE Linux 7P
中以極輕量視窗管理員 ctwm 環境下編輯的,
圖片中顯示用GIMP來開啟原圖,
在原圖上選擇-依顏色(By color...)

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Select - according to color (By color ...)
It will become like this selection

選擇-依顏色(By color...)
選擇後會變成這個樣子

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Added an opaque layer put a layer moving down,

新增一個不透明圖層把這一個圖層往下移動,

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
New layer editor you want to use in original colors,
You can select the layers, and the eyes point down disappear
Such upper layer will temporarily see,
Etc. Well, then after eye points out,
According to the color of selected
area with editing - Clear (Edit - Clear),
If the region can not choose Edit - Restore (Edit - Undo),
Then in accordance with the color of the panel,
press reverse (Invert) and then clear the area.
So you can see the color of the lower layer.

新增的圖層編輯想要用在原圖的顏色,
可以選擇圖層以及把眼睛點下去消失
這樣上層的圖層就會暫時看不到,
等好了之後再把眼睛點出來,
依顏色選的區域用編輯-清除(Edit - Clear),
若區域不對可以選編輯-還原(Edit - Undo),
再在依顏色的面板上按反轉(Invert)後再清除區域.
這樣下層的顏色就能看見了.

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
To the side, there are two approaches,
one is in accordance with the color and then select reverse (Invert)
Then choose the lower layers do not clear the area,
One is to merge down all layers (Flatten Image),
Then choose not to color according to color,
then select the area cleared,
See which is more suitable for use.

到這邊有兩種做法,一種是依顏色再選擇反轉(Invert)
然後選下層圖層清除不要區域,
一種就是把所有圖層向下合併(Flatten Image),
然後依顏色選擇不要顏色,再把選擇區域清除掉,
看哪種比較適合使用.

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Without clear the area becomes transparent, then,
We are going to set out a transparent layer,
Recommend picture mode selection RGB
(Image - Mode - RGB),
Join transparent layers as shown
(Image - Alpha - Add Alpha Channel)

清除區域要是沒有變成透明的話,
就要去設定出透明圖層,
建議圖片模式選擇RGB (Image - Mode - RGB),
如圖加入透明圖層 (Image - Alpha - Add Alpha Channel)

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Complete diagram can be used,
and I take it into an tablecloth,
The first shots are horizontal
gradient background layer.

完成圖就可以用了,小皇拿去設成桌布了,
第一張抓圖是用水平漸層的底色.

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Grab the second is the vertical gradient used background.

第二張抓圖是用垂直漸層的底色.

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
The first phase of the color clear,
painted the same color as possible.

第一階段把顏色分明,盡量塗成同一種顏色.

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Ready to complete the second stage
of FIG no transparency effects.

第二階段準備要完成的圖沒有透明效果.

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
The last complete map with transparent effect.

最後的完成圖有透明效果.
https://www.facebook.com/spuic/posts/1639504133000151
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
I do not know English
English is translated using google translate,
Welcome people with lofty ideals in English
and translated into orthodox English
https://translate.google.com/
小皇不懂英文
英文都是用google translate翻譯的
歡迎會英文的有志之士翻譯成正統英文

---

歡迎光臨 鐵之狂傲 (https://gamez.com.tw/)