鐵之狂傲

 取回密碼
 註冊
搜尋

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

切換到指定樓層
1#
M1084 Standard Cargo Truck
M1084 標準貨運卡車





原文:

The M1084 Standard Cargo Truck with MHE is designed to transport cargo and soldiers. The M1084 has a payload capacity of 10,000 pounds and lift capacity of 2,500 to 5,000 pounds using the on board MHE. The cargo bed side rails are hinged for the ease of loading and unloading cargo.

The cargo bed can be equipped with an optional bench seat kit for transport of soldiers. The bench seats are constructed of a non-wood material and attach to the cargo bed side rails. The seats can be folded down and stowed when not in use. Soldiers are assisted climbing in and out of the cargo bed area with the aid of a ladder stowed on the vehicle when not in use.

A canvas and bows kit is provided to keep soldiers and cargo protected from the elements. The M1084 can be equipped with a self-recovery winch capable of fore/aft vehicle recovery operations. The winch has 280 feet of line capacity and 15,500 pounds bare drum line pull at 110% overload.

[ 本文最後由 jacklf2004 於 08-2-2 11:00 AM 編輯 ]
 
轉播0 分享0 收藏0

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

M1084 Standard Cargo Truck  電腦繪圖 與 實體照:















 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3







No other tactical truck in its class can match its standard features:


Full-time all-wheel drive
Soldier-smart CTIS (Central Tire Inflation System)
Fully automatic transmission
Integral transfer case
Anti-sway bar
High horsepower-to-weight ratio
Fully MANPRINT compliant
HAEMP hardened
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

數據資料:

Basic Vehicle Information

Vehicle Model M1084
NSN 2320-01-354-3387
Drive 6 x 6 (full-time) with locking interaxle differential
Engine Diesel, EPA compliant, 290 hp
Transmission Fully automatic
Axles Single reduction with outboard planetaries
Cab 3-Man, cab-over-engine
Tires Super singles with CTIS
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

Dimensions

Length  306" (7,768 mm)
Height Operational  
For Air Transport 112" (2,845 mm)  
105.5" (2,680 mm)
Width  96" (2,438 mm)
Wheelbase  177" (4,500 mm)
Vehicle Curb Weight No Kits, Crew, Fuel 23,677 lb (10,740 kg)
Ground Clearance Loaded 22" (559 mm)
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

Performance Characteristics


Maximum Speed Governed, at Gross Weight 58 mph (94 km/h)
Range Minimum, at Gross Weight 300+ mi (483+ km)
Maximum Grade  60%
Approach Angle  40o
Departure Angle Standard 36o
Side Slope  30%
Fording Without KIT  
With KIT 36" (914 mm)  
60" (1,524 mm)
Payload  10,000 lb (4,536 kg)
Towed Load  21,000 lb (9,526 kg)
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

Equipment Specifications


Cab Crew Seating 3-Man
Seat Design Fore/Aft adjustable
Steering Wheel Adjustable, tilt and telescopic
Steering Type Power assist
Storage (behind seats) 4 cu-ft each


Cab Suspension Air spring with integral dampers
Engine Caterpillar, Diesel, 6-Cylinder 6.6 L, turbocharged and aftercooled
Rating 290 hp (216 kW) @ 2600 rpm, EPA-certified
Governor Mechanical


Fuel Diesel, DF-2, JP-4, JP-8, V V-F-800
Oil 18 qt (17 L) (MIL-L-2104D, MIL-L-46167)
Cooling Water, radiator
Fan Engine-driven, clutch-type


Transmission Allison Fully automatic, electronically controlled
Speeds 7 speeds, automatic/select

Full-time All-wheel Drive Integral transfer case with locking interaxle differential
Normal Operation 30% torque front wheels, 70% torque rear wheels
Off-Road (locked diff.) Equal speed front-to-rear
Oil 31.8 qt (30 L) (MIL-L-2104D, MIL-L-46167)
Axles Rockwell Front, Ft-rear, and R-rear
Carrier Single reduction, amboid gearing


Wheel Ends Bevel gear wheel end reduction

Wheel End Ratio 2:1
Overall Axle Gear Ratio 7.8:1  
Front Axel Steering Angle 35o
Brakes Air-activated, internal expansion (wedge)
Alternator Engine-driven EMI/RFI suppressed, waterproof
Rating Standard 100 amp
Option 200 amp
Voltage 12/24 V
Tire Inflation System Eaton Electronic (cab-mounted) controls  
- Highway   - Cross-country   - Sand/Mud/Snow  
- Emergency


Cargo Bed Dimensions 168 x 95"          (4,267 x 2,413 mm)
Ladder Stowed, metallic
Construction All steel, E-coat rustproofing, dropside with side rail storage
Standard Options Bows and tarp kit
Material Handling  


Equipment Loading/Unloading Crane Loads/unloads cargo bed and trailer, hydraulic operation, 2,500 lb (1,134 kg) lift at 14 ft (4.3 m), 5,000 lb (2,268 kg) at 7 ft (2.1 m), includes stabilizers and local and remote controls
Self-Recovery Winch Standard Option Fore/aft recovery positions; hydraulic operation;  
280 ft (85.3  m) line capacity; 15,500 lb (7,031 kg) bare drum line pull; 110% overload
 

回覆 使用道具 檢舉

版主

S.I.A.M 管理者

Rank: 3Rank: 3Rank: 3

載具介紹:

M1084 標準貨運卡車為美國陸軍M1083的改進型,噸位5噸。

其車後配備了升降平台,用以載運機具等貨物品。




關於 LMTV (中型戰術車輛)請參考:

M1079 2.5噸箱式貨車 與 FMTV車種。
 

回覆 使用道具 檢舉

你需要登入後才可以回覆 登入 | 註冊

存檔|手機版|聯絡我們|新聞提供|鐵之狂傲

GMT+8, 24-12-28 18:36 , Processed in 0.021890 second(s), 16 queries , Gzip On.

回頂部